SLO Grrrl
02-08-2007, 12:09 PM
I'm looking to sell both of my first generation R6's plus the tons of spare parts I have.
1 street bike (2002), 1 race bike (2000) & lots of spares.
Looking for $6500 for the whole package. I would prefer to sell as a whole, but they can be split up too.
Location: San Luis Obispo, CA
2002 R6: ***UPDATE 2/20/07: The 2002 R6 is now being parted out***
Yosh slip on, 49 state ECU, jet kit, steel braided lines front & rear, 520 chain conversion, NRC covers on both sides, safety wired per WERA.
I've been the only owner of this bike. I did ride it at the track a bit, but primarily it's a street bike. 42k miles on it. The motor received a small crack (has since been repaired) when the chain let go and jammed in the front sprocket area. The crack was repaired, and no leaks have been evident since.
Original headlight assembly was sold; a used one is now on the bike although one lens is cracked the lights function normally.
The bike has a clean title & is still current on registration (Calif).
This bike has experienced 2 minor low side crashes. No alignment or fitment issues have resulted.
Valve inspection done at 36k miles - all within spec.
I have kept detailed records of work done to this bike since it was purchased brand-new.
Blue/white color scheme.
2000 R6 Race Bike:
Race only - not street legal.
Built motor (~110 hp on pump); Ohlins rear; built front forks; Vortex sprockets, front stay, clip ons & rear sets; Hindle full exhaust, 520 chain, Sharkskinz body work, Galfer organic compound brake pads; steel braided lines; Scott's steering dampner. Also has fresh fork seals & oil and new brake pads (2 weekends on pads). Safty wired per WERA specs.
I have kept a detailed notebook on the race bike - includes all track events attended, oil changes, work done, suspension etc.
I've attempted to add a photo of the race bike.
Spare Parts:
1 set extra rims with axles & rotors & cush drive w/ sprocket
2 OEM tail sections
1 Race tail section
2 OEM lowers
1 right side lower
1 left side mid panel
1 spare set of Vortex rear sets
2 spare windscreens
Partial wiring harness
Another jet ket
Calif ECU
Stock muffler
Front & rear full brake systems (reservoir to caliper)
1 OEM main seat
1 OEM passenger seat
Fuel pump
Brake lever
OEM air box
2 sets front rotors
1 rear brake caliper mounted on bracket (ready to bolt onto swing arm)
1 swing arm
Anything else I find that's not listed goes with it too!
Shipping can be arranged - buyer pays all shipping costs.
Krystyna Kubran
kkubran@gmail.com (kkubran@gmail.com)
1 street bike (2002), 1 race bike (2000) & lots of spares.
Looking for $6500 for the whole package. I would prefer to sell as a whole, but they can be split up too.
Location: San Luis Obispo, CA
2002 R6: ***UPDATE 2/20/07: The 2002 R6 is now being parted out***
Yosh slip on, 49 state ECU, jet kit, steel braided lines front & rear, 520 chain conversion, NRC covers on both sides, safety wired per WERA.
I've been the only owner of this bike. I did ride it at the track a bit, but primarily it's a street bike. 42k miles on it. The motor received a small crack (has since been repaired) when the chain let go and jammed in the front sprocket area. The crack was repaired, and no leaks have been evident since.
Original headlight assembly was sold; a used one is now on the bike although one lens is cracked the lights function normally.
The bike has a clean title & is still current on registration (Calif).
This bike has experienced 2 minor low side crashes. No alignment or fitment issues have resulted.
Valve inspection done at 36k miles - all within spec.
I have kept detailed records of work done to this bike since it was purchased brand-new.
Blue/white color scheme.
2000 R6 Race Bike:
Race only - not street legal.
Built motor (~110 hp on pump); Ohlins rear; built front forks; Vortex sprockets, front stay, clip ons & rear sets; Hindle full exhaust, 520 chain, Sharkskinz body work, Galfer organic compound brake pads; steel braided lines; Scott's steering dampner. Also has fresh fork seals & oil and new brake pads (2 weekends on pads). Safty wired per WERA specs.
I have kept a detailed notebook on the race bike - includes all track events attended, oil changes, work done, suspension etc.
I've attempted to add a photo of the race bike.
Spare Parts:
1 set extra rims with axles & rotors & cush drive w/ sprocket
2 OEM tail sections
1 Race tail section
2 OEM lowers
1 right side lower
1 left side mid panel
1 spare set of Vortex rear sets
2 spare windscreens
Partial wiring harness
Another jet ket
Calif ECU
Stock muffler
Front & rear full brake systems (reservoir to caliper)
1 OEM main seat
1 OEM passenger seat
Fuel pump
Brake lever
OEM air box
2 sets front rotors
1 rear brake caliper mounted on bracket (ready to bolt onto swing arm)
1 swing arm
Anything else I find that's not listed goes with it too!
Shipping can be arranged - buyer pays all shipping costs.
Krystyna Kubran
kkubran@gmail.com (kkubran@gmail.com)